Electromagnetic Compatibility Notices (Usa) - Intel SBCE Setup Manual

Europe:
Japan:
Australia/New
Zealand:
Taiwan:
Korea:
Russia:
International:

Electromagnetic compatibility notices (USA)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his/her
own expense.
NOTE
Class A device definition: If a Class A device is installed within the is system, then the system is to be
considered a Class A system. In this configuration, operation of this equipment in a residential area is
likely to cause harmful interference.
NOTE
This product is intended to be installed with CAT5 cable, or equivalent, to minimize electrical
interference.
xii
Intel® Blade Server Chassis SBCE: Serial over LAN (SOL) Setup Guide
EMC Directive, 89/336/EEC
EN55022, Class A Limit, Radiated & Conducted Emissions
EN55024 ITE Specific Immunity Standard
EN61000-4-2 ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge)
EN61000-4-3 Radiated Immunity (Level 2)
EN61000-4-4 Electrical Fast Transient (Level 2)
EN61000-4-5 AC Surge
EN61000-4-6 Conducted RF
EN61000-4-8 Power Frequency Magnetic Fields
EN61000-4-11 Voltage Dips and Interrupts
EN6100-3-3 Voltage Flicker
VCCI Class A ITE (CISPR 22, Class A Limit)
IEC 1000-3-2 Limit for Harmonic Current Emissions
AS/NZS 3548, Class A Limit
BSMI Approval
RRL Approval
GOST Approval
CISPR 22, Class A Limit