Mounting And Unmounting Media For The Intel - Intel SBCE Setup Manual

Mounting and unmounting media for the Intel

Blade SBXL52 and the Intel
The following sections describe how to mount and unmount media using the Red Hat Enterprise Linux ES 2.1
operating system for the Intel
Mounting and unmounting media in Red Hat Enterprise Linux ES 2.1
This procedure is based on a default installation of Red Hat Enterprise Linux ES 2.1. The file names,
structures, and commands might be different for other versions of Red Hat Linux.
Use one of the following procedures to mount media when using the Red Hat Enterprise Linux ES 2.1
operating system with an Intel
• Complete the following steps if the medium to be mounted is a CD:
1. Make sure that the /mnt/cdrom directory exists on your server. If this directory does not exist, type
mkdir /mnt/cdrom
and then press Enter.
2. To mount the CD, type
mount /dev/scd0 –t iso9660 –o ro /mnt/cdrom
and then press Enter.
• Complete the following steps if the medium to be mounted is a diskette:
1. Make sure that the /mnt/floppy directory exists on your server. If this directory does not exist, type
mkdir /mnt/floppy
and then press Enter.
2. To mount the diskette, type
mount /dev/sda –o auto /mnt/floppy
and then press Enter.
Complete the following steps to unmount media when using the Red Hat Enterprise Linux ES 2.1 operating
system with an Intel
1. Type cd and then press Enter.
2. Type one of the following commands:
• If the medium to be unmounted is a CD, type
umount /mnt/cdrom
and then press Enter.
• If the medium to be unmounted is a diskette, type
umount /mnt/floppy
and then press Enter.
28
®
Server Compute Blade SBX44
®
Server Compute Blade SBXL52 and the Intel
®
Server Compute Blade SBXL52 or an Intel
®
Server Compute Blade SBXL52 or an Intel
®
Server Compute
®
Server Compute Blade SBX44.
®
Server Compute Blade SBX44:
®
Server Compute Blade SBX44:
Intel® Blade Server Chassis SBCE: Serial over LAN (SOL) Setup Guide