Select:) Utility Menu Branch; Utility:) Time (Real-Time Clock) Submenu; Utility:) Disp (Vfd Display) Submenu - Comtech EF Data MN/LBC4000.IOM Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Front Panel Operation
6.2.6

(SELECT:) UTILITY Menu Branch

Use the [][] arrow keys to move the cursor to the desired choice. Press
[ENT]. The function of each UTILITY submenu is as follows:
• TIME Submenu – This allows configuration of the Real-Time Clock.
• DISP Submenu – This allows adjustment of the Video Fluorescent Display
(VFD) brightness level.
• FIRMWARE Submenus – This allows you to review and select for bootup
one of two installed firmware images.
• AID Submenu – This allows you to create a unit label.
• LAMPTEST Submenu – This executes a diagnostic test of the front panel
LEDs and VFD.
• RELAY Submenu – This allows you to set the Fault Relay Logic as Normal
or Inverted.
• SCRSAVER Submenu – This allows you to set one of five different screen
saver behaviors.

6.2.6.1 (UTILITY:) TIME (Real-Time Clock) Submenu

This function follows Military time format (00 to 24 hours).
Edit the time and date settings of the real-time clock. Use the [][] arrow keys
to select a digit to edit, and then use the [][] arrow keys to change its value.
Press [ENT].

6.2.6.2 (UTILITY:) DISP (VFD Display) Submenu

TIME DISP FIRMWARE AID
LAMPTEST RELAY SCRSAVER
Edit Real-Time Clock:
HH:MM:SS MM/DD/YY
VFD Display Brightness:
100%
6–18
MN/LBC4000.IOM
Revision 5