Playback - Denon DN-500AV Owner's Manual

Tone
Adjust the tonal quality of the sound.
Setting items
Tone Control ON : Allow tone adjustment (bass, treble).
Set the tone control function OFF : Playback without tone adjustment.
to "ON" and "OFF".
NOTE
• "Tone Control" settings are not reflected to ZONE2.
• The tone cannot be adjusted in the "DIRECT" mode.
Bass –6dB – +6dB
Adjust low frequency range
"Bass" can be set when "Tone Control" is set to "ON".
(bass).
Treble –6dB – +6dB
Adjust high frequency range
"Treble" can be set when "Tone Control" is set to "ON".
(treble).
Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
Setting items
Adjust Channel q Select the speaker tone adjustment method.
Correct the tone of each
All : Adjust the tone of all speakers together.
speaker. L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Default" and press
settings.
the "Return settings to the default?" prompt
is displayed. Select either "Yes" or "No", and
ENTER
press
BD
Setting details
Default settings are underlined.
Setting details
ENTER
,
.
RESTORER
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use RESTORER.
Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.
• "RESTORER" settings are stored for each input source.
• This item default setting for "iPod" and "NET/USB" is "Mode3". All others are set to "OFF".
• When set to something other than "OFF",
• This cannot be set when the surround mode is set to "DIRECT" or "PURE DIRECT".
Audio Delay
While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync"(vpage 68) is set to
"ON" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode"
"Game".
62
Setting details
is displayed.
Default settings are underlined.
Setting details
(vpage 79) is set to "Auto" or
Audio Adjust