Denon DN-500AV Owner's Manual page 18

Connecting a digital camcorder
For instructions on HDMI connections, see "Connecting an HDMI-compatible device" (vpage 7).
Cables used for connections
Video cable (sold separately)
Video cable
Audio cable (sold separately)
L
Audio cable
R
Digital camcorder
VIDEO AUDIO
VIDEO AUDIO
OUT OUT
L R
L R
L R
SELECT
2
QUICK SELECT
AV SURROUND PREAMPLIFIER DN-500AV
Set as Necessary
Set this to change the digital input connector or component video input connector to which the input
source is assigned.
"Input Assign" (vpage 78)
NOTE
When a non-standard video signal from a game machine or some other source is input, the video conversion
function might not operate. In this case, use the monitor output of the same connector as the input.
BD
L
R
MASTER VOLUME
i-Pod
SLEEP STATUS
3 4
Connecting a control dock for iPod
• For a control dock for iPod, use ASD-1R or ASD-11R made by DENON (sold separately).
• For instructions on the control dock for iPod settings, refer to the control dock for iPod's operating
instructions.
• For details on the operations, see "Use a DENON control dock for iPod to play back" (vpage 21).
Control dock for iPod
ASD-11R
R L
Use the AV/Control
Cable supplied with
the DENON control
dock for iPod.
R L
12