Denon DN-500AV Owner's Manual page 90

6
Pressing ui, select the first letter of the device
brand name. Then press ENTER .
RemoteSetupGuide
[1/4]
Please select the
1
first letter of the
A
brand name
B
of the device.
C
D
DVD
E
[CH+/-]Page+/-
• The first character is displayed as 1, A to Z.
(Initials for the brand are displayed for each
category.)
For brand names that start with numbers
and symbols, select "1".
• When there are several pages of brand
names, the pages can be switched by
CH +
pressing the remote control unit's or
CH –
.
7
Pressing ui, select the device
brand name. Then press ENTER .
RemoteSetupGuide
Please select the
Dantax
brand name.
Denon
Disney
DSE
Durabrand
DVD
• When there are several pages of brand names, the pages can be
switched by pressing the remote control unit's
NOTE
If the desired brand name is not listed, the supplied remote control
unit cannot control the device. Use the remote control unit supplied
with the device to be used.
BD
8
The procedures for registering remote control codes
and remote control preset registration are displayed.
RemoteSetupGuide
Device DVD
Brand Denon
Code 30490[1/3]
1.Press[INPUT SOURCE].
2.Press and hold [DEVICE ON(I)]
for 3 seconds.
3.Input Code with [0-9].
4.Press any key to check device.
[QUICK1] OK [QUICK2]
NOTE
If a wrong brand name is selected, press
QUICK SELECT 3
. The following screen is
displayed:
AMP ENTER
Press then
9
Press the input source button
on which the preset code is to
be registered (
DVD V.AUX
,
GAME2 or CD
TV
CH + CH – • For , only the preset code for the
or .
categories "TV", "TV/DVD" or "TV/VCR"
can be registered.
Input source
select buttons
NG [QUICK3] Return
RemoteSetupGuide
Press [AMP] button. And press
[ENTER] button to return Brand
select menu.
O K
to return to step 7.
Input source
select buttons
BD , SAT/CBL , TV ,
DOCK GAME1
, , ,
).
84
Registering preset codes
10
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
The zone mode indicator flashes
twice.
11
0 – 9
Enter a five-digit code using
Press the buttons with an interval less than 10 seconds.
RemoteSetupGuide
Device DVD
Brand Denon
Code 30490[1/3]
1.Press[INPUT SOURCE].
2.Press and hold [DEVICE ON(I)]
for 3 seconds.
3.Input Code with [0-9].
4.Press any key to check device.
[QUICK1] OK [QUICK2] NG [QUICK3]
• When the code is registered.
The zone mode indicator flashes twice.
• When the code is not registered correctly
The mode indicator slowly flashes once. Perform from step 9
again.
• When an input number is not correct
ON
Press once then perform the operations from step 9 again.
12
Operate the device being used to
check the operation.
QUICK SELECT 1
• If the device is operating, press
Go to step 13.
QUICK SELECT 2
• If the device is not operating, press
Go to step 14.
.
Return
.
.
vSee overleaf