Denon DN-500AV Owner's Manual page 25

Playback (Basic operation)
Settings (vpage 18)
n Selecting the input source (vpage 19)
n Adjusting the master volume (vpage 20)
n Turning off the sound temporarily (vpage 20)
n Playing a Blu-ray Disc player/DVD player
(vpage 20)
n Playing a CD player (vpage 20)
n Playing an iPod (vpage 21)
n Playing network audio (vpage 25)
n Playing a USB memory device (vpage 30)
Selecting a listening mode (Surround mode)
(vpage 33)
Playback (Advanced operation) (vpage 46)
BD
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
Press the input source select button
( BD , SAT/CBL , TV , NET/USB , DVD ,
V.AUX DOCK GAME1 GAME2
, , , or
CD ) to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Using the knob on the main unit
SOURCE SELECT
Turn .
SOURCE SELECT
• Turning switches the input source, as shown
below.
SAT/CBL GAME1 GAME2
TV DVD BD CD
iPod 1
• When on the main unit is pressed, the input source of this
unit is switched to "DOCK" or "NET/USB" and the connected
iPod is automatically played (vpage 24
19
n Using the "Source Select" menu
Switch the remote control unit to the
performing this operation
If the remote control unit is in
Select" menu will not be displayed when
pressed.
Source Select
Player
BD
DVD
CD
DOCK
USB/iPod
[ ] Move
SOURCE SELECT
q Press
Display the "Source Select" menu.
uio p
w Use
ENTER
then press
The input source is set and the source
selection menu is turned off.
V.AUX DOCK
NET/USB
"iPod play function").
• When using with an iPod connected directly to the USB port of this
unit, select "USB/iPod" for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at "Source Delete" (vpage 73).
• To turn off the source selection menu without selecting an input
SOURCE SELECT
source, press
SOURCE SELECT
• When
automatically (vpage 82).
J
(MAIN ZONE) mode when
(vpage 82 "Operating AV devices").
K
(ZONE2) mode, the "Source
SOURCE SELECT
The currently selected input
source is highlighted.
Video Network
SAT/CBL Favorites
TV Media Server
GAME1
GAME2
V.AUX
[ENTER] Enter
.
to select the input source,
.
again.
is pressed, the AMP-operation mode starts
is