Denon DN-500AV Owner's Manual page 69

Information
Show information about receiver settings, input signals, etc.
Items
Status n MAIN ZONE
Show information about
This item shows information about settings for MAIN ZONE.
current settings.
The information displayed differs according to the input source.
Select Source / Name / Surround Mode / Input Mode /
Decode Mode / Assign / Video Select / Video Mode /
Content Type etc.
n ZONE2
This item shows information about settings for ZONE2.
Power / Select Source / Volume Level
"Volume Level" for ZONE2 is displayed when "Amp Assign" is set to
"ZONE2".
Audio Signal Surround Mode : The currently set surround mode.
Show information about Signal : The input signal type.
audio input signals. fs : The input signal's sampling frequency.
Format : The number of channels in the input signal (front, surround, LFE).
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
HDMI Information Signal Info.
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
Monitor Info.
and monitor.
• Interface / Support Resl.
BD
Setting details
Dialogue normalization function
STATUS
on the main unit.
The figure is the corrected value.
This cannot be changed.
Items
Auto Surround Analog/PCM 2ch / Digital 2ch / Digital 5.1ch / Multi ch
Show information about
auto surround mode
settings.
Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4 /
Show information about
ZONE2 Quick Select 1 / ZONE2 Quick Select 2 / ZONE2 Quick Select 3 /
"Quick select function" ZONE2 Quick Select 4
(vpage 49) settings. • Name / Volume Level / Select Source / Video Select /
Auto Surround Mode Analog/PCM 2ch /
Auto Surround Mode Digital 2ch /
Auto Surround Mode Digital 5.1ch /
Auto Surround Mode Multi ch
"Volume Level" for ZONE2 is displayed when "Amp Assign" is set to
"ZONE2".
Preset Channel A1 – G8
Shows information about
"A1 – G8" is displayed when the input source is "NET/USB".
preset channels.
NET/USB
63
Setting details