Denon DN-500AV Owner's Manual page 60

How to make detailed settings
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
Menu
Audio Adjust Surr.Parameter
Information Tone
Setup Wizard AudysseySettings
System Setup Manual EQ
Input Setup RESTORER
Audio Delay
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.
BD
Setting items Detailed items
Audio Adjust Surr.Parameter
Tone
Manual EQ
RESTORER
Audio Delay
Information Status
Audio Signal
HDMI Information
Auto Surround
Quick Select
Preset Channel
Setup Wizard
System Setup Speaker Setup
HDMI Setup
Audio Setup
Network Setup
ZONE2 Setup
Option Setup
Language
Input Setup Input Assign
Video
Input Mode
Displayed items of the "Input
Rename
Setup" menu differs, depending on
Source Level
the selected input source.
Playback Mode
Still Picture
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Uses the graphic equalizer to adjust the tone of each speaker.
Expands the low and high frequency components of compressed audio to enable
richer audio playback.
Compensates for incorrect timing between video and audio.
Shows information about current settings.
Shows information about audio input signals.
Displays the HDMI input/output signals and HDMI monitor information.
Displays the settings stored for the auto surround mode.
Displays the settings stored for the Quick Select function.
Shows information about preset channels.
Perform the installation, connection, and setup procedures to prepare the unit for
operation following guidance.
Sets the speaker size and distance, the channel level, etc.
Makes settings for HDMI video/audio output.
Makes settings for audio playback.
Makes network settings.
Makes settings for audio playback in a ZONE2 system.
Makes various other settings.
Sets the language for display the menu on the TV screen.
Changes input connector assignment.
Makes the video settings.
Sets the audio input mode and decode mode.
Changes the display name for this source.
Adjusts the playback level of the audio input.
Makes settings for iPod, USB memory device or network source playback.
Makes settings for still picture playback.
54
Description Page
60
62
62
62
62
63
63
63
63
63
63
C 4
65
68
69
70
73
73
76
78
79
80
80
80
81
81