Denon DN-500AV Owner's Manual page 59

Quick select function
It is also possible to save four settings for ZONE2.
n Saving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage 52)
w Volume (vpage 52)
NOTE
The settings for each content (Media Server, iPod, etc.) cannot
be memorized for the "NET/USB" source of ZONE2.
2
ZONE SELECT
Press to switch the
zone mode to K (ZONE2).
3
In the zone mode for which
you want to operate, press and
QUICK SELECT
hold the desired
until "Memory" appears on the
display.
The current settings will be memorized.
GQuick select defaultsH
Input source
ZONE2 QUICK SELECT 1 BD
ZONE2 QUICK SELECT 2 SAT/CBL
ZONE2 QUICK SELECT 3 –
ZONE2 QUICK SELECT 4 NET/USB
BD
n Recalling the settings
1
Press ZONE SELECT
zone mode to K (ZONE2).
2
QUICK SELECT
Press
the settings you want to call out
are saved.
Naming quick select settings
See "Quick Sel.Name" (vpage 74).
Volume
–40dB
–40dB
–
–40dB
Sleep timer function
This is useful when you want to sleep while listening in ZONE2.
1
to switch the
2
at which
• The time switches as shown below each
time
• If
remote control unit can be obtained.
To confirm the countdown time before putting the
unit to sleep
Press
"Z2 Sleep : zmin" appears on the display.
z Countdown time
To cancel the sleep timer
Press
The sleep timer is also canceled when this unit is set to the standby
mode or the ZONE2 power is turned off.
NOTE
The power of devices connected to this unit is not switched off by the
sleep timer function. To turn off the power to connected devices, set
the sleep timer functions on each of the connected devices.
53
Press ZONE SELECT to switch the
K
zone mode to (ZONE2).
SLEEP
Press and display the time
you want to set.
SLEEP
is pressed.
OFF 10 min 20 30
120 100 90 80
110
SLEEP
on the main unit is pressed, the same function as with the
SLEEP
.
SLEEP
to set "OFF".
40 50
70 60