Denon DN-500AV Owner's Manual page 71

Speaker Setup
Perform when setting the speakers.
• "System Setup" can be used without changing the settings. Please set if necessary.
Setting items
Amp Assign NORMAL : Select the "NORMAL" setting to perform 7.1-channel playback
The signal output from the using the surround back.
Surround back terminals of ZONE2 : Select the "ZONE2" setting to assign the Surround back
this unit can be switched terminals for ZONE2 and output the audio in stereo.
to match your speaker Bi-AMP : Select the "Bi-AMP" setting to connect the front speakers via
environment. the bi-amp connection.
Front B : Select the "Front B" setting to use the second set of front
speakers for playback. You can switch the front speakers A and B to be
used for playback in accordance with the 2-channel playback or multi-
channel playback mode. When you select this Front B setting, also
perform the "Front Sp Setup" (vpage 67) procedure.
F.HEIGHT : Select the "F.HEIGHT" setting to use the front height speaker
for playback.
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "S.Back" and
"Large" or "Small" speaker.
"F.Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover Freq."
• Large : Use a large speaker that can adequately play back low
(vpage 67) as the
frequencies.
standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
BD
Default settings are underlined.
Setting details
Setting items
Speaker Config. Subwoofer : Set the presence of a subwoofer.
(Continued) • Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "S.Back" and "F.Height" can be
set to "Large".
• When "Surround" is set to "None", "S.Back" and "F.Height" are
automatically set to "None".
S.Back : Set the presence, size and number of surround back speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2spkrs : Use two surround back speakers.
• 1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
Even when the "S.Back" setting is other than "None", sound may
not be emitted from the surround back speaker, depending on the
playback source. In this case, make "Surr.Parameter" – "S.Back"
setting other than "OFF" (vpage 61).
NOTE
When "Amp Assign" setting
make the "S.Back" setting.
65
System Setup
Setting details
(vpage 65) is "NORMAL", you can
vSee overleaf