Denon DN-500AV Owner's Manual page 55

Quick select function
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access.
n Saving the settings
1
Set the items below to the settings you want to save.
z
q Input source (vpage 19)
w Volume (vpage 20)
e Surround mode (vpage 33)
r Video Select (vpage 79)
z The "NET/USB" source of MAIN ZONE can even
memorize the menu screen of each content (Media Server,
iPod/USB, etc.).
2
Press and hold the desired QUICK SELECT
"Memory" appears on the display.
The current settings will be memorized.
GQuick select defaultsH
Input source
QUICK SELECT 1 BD
QUICK SELECT 2 SAT/CBL
GAME1
QUICK SELECT 3
NET/USB (iPod/USB)
QUICK SELECT 4
BD
n Recalling the settings
QUICK SELECT
Press
settings you want to call out are saved.
Naming quick select settings
See "Quick Sel.Name" (vpage 74).
• The Quick Select function can be set separately for the different
zones (vpage 53 "Quick select function").
QUICK SELECT
• If on the main unit is pressed, the same function as
with the remote control unit can be obtained.
NOTE
until
Input sources stored with the quick select function cannot be selected
if they have been deleted at "Source Delete"
case, store them again.
Volume
–40 dB
–40 dB
–40 dB
–40 dB
Key lock function
at which the To prevent accidental operation of this unit, you can disable operation
of the buttons on the front panel.
Press and hold
"Panel lock:ON" appears on the display and buttons other than
STANDBY
(vpage 73). In this
n Cancelling the key lock function
While the key lock function is enabled, press and hold
KEY LOCK
"Panel lock:OFF" appears on the display and the key lock function
is cancelled.
While the key lock function is enabled, you can still operate this unit
through the remote control, IP control, or RS-232C commands.
49
Convenient functions
KEY LOCK
KEY LOCK
for three seconds and longer.
become unavailable for operation.
for three seconds and longer.
ON/