Playback - Denon DN-500AV Owner's Manual

Playback in ZONE2 (Separate room)
You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play
back separate sources in the MAIN ZONE and ZONE2.
Audio output
There are two methods to do this, as described below. Choose one of the methods.
q Zone playback by balanced output
w Zone playback by audio output
Use an external amplifier.
q Zone playback by balanced output
The ZONE2 audio signals are output from the unit's surround back terminals using the amplifier assignment
function.
n Connecting and setting the speakers
"Amp Assign" setting (vpage 65) and audio
signals output
Output signal :
ZONE2
Stereo (L / R)
BD
Connecting the speakers
This unit
ZONE2
RCA RCA RCA RCA RCA
XLR XLR XLR XLR XLR
(L) (R)
w q w q
SPEAKERS SPEAKERS SPEAKERS SPEAKERS SPEAKERS
Power amplifier
w Zone playback by audio output
n Audio connections (ZONE2)
The audio signals of this unit's ZONE2 audio output terminals are output to the ZONE2 amplifiers and
played on this amplifiers.
ZONE2
AUX IN
• Adjust the volume on the connected amplifier.
• We recommend using high quality pin-plug cables for audio connections in order to prevent noise.
• Also be sure to read the operating instructions of the connected devices.
NOTE
It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL connectors in
ZONE2. Play using analog connections (in stereo).
51
MAIN ZONE
This unit
R L