Troubleshooting; Error Code Classification; Error Codes & How To Fix Them; Configuration Errors - Delta AS Series Operation Manual

9.6 Troubleshooting

This section provides an overview of error codes and troubleshooting for the AS Series.

9.6.1 Error Code Classification

There are two types of error code categories for the AS Series: Configuration Errors, and Application Errors. These error
codes are defined by the ODVA for EtherNet/IP errors. Refer to the following table for AS Series error codes.
Error Code Classification
1 st Phase
Category
Configuration error
Application error
* Only the last 2 bytes of the error code are shown; for example, only 011C appears for the error code H'1101011C.
9.6.2 Error Codes & How to fix them

9.6.2.1 Configuration Errors

(EIP Builder only shows Low word error codes)

Category Error Code
H'1101011C
H'11010114
EDS Files
Mismatched
H'11010115
H'11010116
C h a p t e r 9 E t h e r n e t S p e c i f i c a t i o n a n d O p e r a t i o n
2 nd Phase
Item
EDS files mismatched
Data exchange setup error
Ethernet/IP error
Description
The Transport Class field
values of the Transport Class
and Trigger in the EDS file
are mismatched.
The Vender ID or the Product
Code in the EDS file is
mismatched.
The device type parameters
in the EDS file are
mismatched.
The revision parameters in
the EDS file are mismatched.
Description
Mismatched EDS files lead to I/O connection
failure. *
Data exchange setup error lead to I/O
connection failure. *
EtherNet/IP communication failure *
How to fix them
1. Check if the product information and the EDS file
match.
2. Reload the EDS file.
3. Ask the vendor of the device for the EDS file.
1. Check if the product information and the EDS
file match.
2. Reload the EDS file.
3. Ask the vendor of the device for the EDS file.
1. Check if the product information and the EDS file
match.
2. Reload the EDS file.
3. Ask the vendor of the device for the EDS file.
1. Check if the product information and the EDS file
match.
9_
9 - 4 7