Troubleshooting; Error Code Classification; Error Codes & How To Fix Them; Configuration Errors - Delta DVP-ES3 Series Operation Manual

D V P - E S 3 S e r i e s O p e r a t i o n Ma n u a l

9.5 Troubleshooting

This section provides an overview of error codes and troubleshooting for the DVP-ES3 Series.

9.5.1 Error Code Classification

There are two types of error code categories for DVP-ES3 Series: Configuration Errors, and Application Errors. These
error codes are defined by the ODVA for EtherNet/IP errors. Refer to the following table for DVP-ES3 Series error codes.
st
1
Category
Configuration error
Application error
* Only the last 2 bytes of the error code are shown; for example, only 011C appears for the error code H'1101011C.
9.5.2 Error Codes & How to fix them

9.5.2.1 Configuration Errors

(EIP Builder only shows Low word error codes)
Category
EDS Files
Mismatched
_9
9 - 2 2
Error Code Classification
Phase
EDS files mismatched
Data exchange setup error
Error Code Description
The Transport Class field
values of the Transport Class
H'1101011C
and Trigger in the EDS file
are mismatched.
The Vender ID or the Product
H'11010114 Code in the EDS file is
mismatched.
The device type parameters
H'11010115 in the EDS file are
mismatched.
The revision parameters in
H'11010116
the EDS file are mismatched.
nd
2 Phase
Item
Mismatched EDS files lead to I/O connection
failure. *
Data exchange setup error lead to I/O
connection failure. *
Ethernet/IP error EtherNet/IP communication failure *
1. Check if the product information and the EDS file
match.
2. Reload the EDS file.
3. Ask the vendor of the device for the EDS file.
1. Check if the product information and the EDS
file match.
2. Reload the EDS file.
3. Ask the vendor of the device for the EDS file.
1. Check if the product information and the EDS file
match.
2. Reload the EDS file.
3. Ask the vendor of the device for the EDS file.
1. Check if the product information and the EDS file
match.
Description
How to fix them