Ip Address Types; Set The Ip Address (Static Ip) - Delta AS Series Operation Manual

A S S e r i e s O p e r a t i o n M a n u a l

9.4.2.1 IP Address Types

The AS Series supports 3 types of IP addressing, BOOTP, DHCP and static IP address.
Type of IP Address
BOOTP
DHCP
Static IP

9.4.2.2 Set the IP Address (Static IP)

 Steps to set the IP address
When using an EIP product with a static IP address, set up the IP address in HWCONFIG in ISPSoft. The following
example uses the AS Series.
ISPSof t
HWCONF IG
Refer to Section 9.4.1.1 for how to set up an EIP module in HWCONFIG.
1. Configure the network parameters
Double-click the AS Series module in HWCONFIG to open the Device Setting dialog box.

 On the Options tab, set the IP address on the Ethernet Port Basic Settings page, and then click OK.
_9
9 - 1 6
Uses the TCP/IP Bootstrap Protocol (BOOTP) to set up the IP address, netmask and
gateway. A BOOTP server may require some configuration. The BOOTP protocol is
designed for a network in which each host has a permanent network connection.
Uses the Dynamic Host Configuration Protocol (DHCP) to automatically obtain IP address,
netmask, gateway, main computer name and the WINS server.
You manually set the IP address, netmask and gateway.
Creat e
Project
Open
PLC
N
Definition
Set up
EI P Y
IP Address
Create
EIP M odule
Download
HWCONFIG