Command And Response Tables; Input Switching Commands - Extron electronics IN1606 User Manual

Command and Response Tables

Command

Input Switching Commands

Input selection
Video and audio
Video only
Audio only
View video input
View audio input
View current input
NOTE: Audio breakaway (
Video breakaway ( ) is not allowed from an input configured for any digital audio format.
&
Attempting either of these invalid modes gives an
Audio breakaway is always allowed back to the current video input.
Auto switch mode
Disable auto switch
mode
Prioritize highest active
input
Prioritize lowest active
input
View auto switch
mode
NOTES:
X!
= Input selection
X5!
= Auto switch mode
IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Communication and Control
ASCII Command
(host to scaler)
X!
!
X!
&
X!
$
&
$
!
) is not allowed to an input configured for any digital audio format.
$
E17
E }
0AUSW
E }
1AUSW
E }
2AUSW
E }
AUSW
1-6
0
1
2
Response Additional Description
(scaler to host)
X! • ] Select video and audio from
In All
input
X! • ]
Select video-only from input
In RGB
X! • ]
Select audio-only from input
In Aud
X!] View the current video input.
X!] View the current audio input.
X!] View the current video and
audio input.
error.
Manual input switching only.
]
Ausw0
] Automatically switches to the
Ausw1
highest numbered active input.
] Automatically switches to the
Ausw2
lowest numbered active input.
X5!] View the current auto switch
mode.
(IN1606) or (IN1608 models)
1-8
= disable
= gives priority to the highest numbered active input
= gives priority to the lowest numbered active input
X!
.
X!
.
X!
.
35