Extron electronics IN1606 User Manual page 17

HDMI output connectors — Connect display devices to the HDMI connectors. Use
h
one of these connectors for a local monitor to display the OSD menu (see
on page 14).
TIP: Use Extron HDMI LockIt Lacing Brackets to secure HDMI cables to the device
(see HDMI Connections
Analog audio output connectors — Connect audio output devices to these 5-pole
i
captive screw connectors. Wire the connector for line level, balanced or unbalanced,
analog stereo.
Tip
Ring
Sleeves
Tip
Ring
Balanced Audio Output
Figure 8. Audio Output Connector Wiring
LAN connector — Connect a computer network to this RJ-45 connector. Use a
h
patch cable to connect to a switch, hub, or router. Wire the connector as shown below.
Pin T568A
Wire Color
1 White-green
2 Green
3 White-orange
4 Blue
5 White-blue
6 Orange
7 White-brown
8 Brown
LEDs on this connector indicate link and activity status.
RS-232 connector — Connect a host device to this 3-pole captive screw connector
i
for RS-232 serial control. The default baud rate is 9600.
RS-232
Tx Rx G
Do not tin the wires!
Ground (G)
Receive (Rx)
Transmit (Tx)
Figure 9. RS-232 Wiring
IN1606 and IN1608 Series Scaling Presentation Switcher • Installation
on page 12).
No Ground Here
Tip
Sleeves
Tip
No Ground Here
Unbalanced Audio Output
Pins:
T568B
12345678
Wire Color
White-orange
Orange
White-green
Blue
White-blue
Green
Insert Twisted
Pair Wires
White-brown
RJ-45
Brown
Connector
Controlling
Device
Bidirectional
Ground (G)
Receive (Rx)
Transmit (Tx)
Operation
Do not tin the wires!
T568A T568B
Pin Wire color Wire color
1 White-green White-orange
2 Green Orange
3 White-orange White-green
4 Blue Blue
5 White-blue White-blue
6 Orange Green
7 White-brown White-brown
8 Brown Brown
11