Saving Changes - D-Link DES-3326SR User Manual

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The following table summarizes the Admin and User privileges:
Switch Configuration
Management
Configuration
Network Monitoring
Community Strings and
Stations
Update Firmware and Configuration
Files
System Utilities
Factory Reset
Reboot Switch
User Account Management
Add/Update/Delete User Accounts
View User Accounts
Table 6-1. Root, User+, and User Privileges
After establishing a User Account with Admin-level privileges,
highlight Save Changes and press Enter (see below). The
switch will save any changes to its non-volatile ram and reboot.
You can logon again and are now ready to continue configuring
the Switch.

Saving Changes

The DES-3326SR has two levels of memory; normal RAM and
non-volatile or NV-RAM. Configuration changes are made
effective by highlighting Apply and pressing the Apply button.
When this is done, the settings will be immediately applied to
the switching software in RAM, and will immediately take
effect.
Privilege
Admin
Yes
Yes
Trap Yes
Yes
Yes
Yes
Yes
Yes
Yes
150
User
Read Only
Read Only
Read Only
No
Ping Only
No
No
No
No