D-Link DES-3326SR User Manual page 252

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
multicast delivery tree (not 'pruned') – if there is an alternative
route.
The following fields can be set:
Parameter Description
Interface
Name<System>
IP Address
Probe Interval
<10>
Neighbor Timeout
Interval <35>
Metric <1>
Displays the name of the IP interface
for which DVMRP is to be configured.
This must be a previously defined IP
interface.
Displays the IP
corresponding to the IP Interface
name entered above.
This field allows an entry between 0
and 65,535 seconds and defines the
interval between 'probes'. The default
is 10.
This field allows an entry between 1
and 65,535 seconds and defines the
time period for DVMRP will hold
Neighbor Router reports
issuing poison route messages. The
default is 35 seconds.
This field allows an entry between 1
and 31 and defines the route cost for
the IP interface. The DVMRP route
cost is a relative number
represents the real cost of using this
route in the construction
multicast delivery tree. It is similar
to, but not defined as, the hop count
in RIP. The default cost is 1.
240
address
before
that
of a