DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Parameter
Description
Index
Server IP
Severity
Facility
UDP Port
Status
System Log State
To enable the System Log Server settings you have chosen
select Enabled and click the Apply button in the System Log
State menu.
Figure 6 - 109. System Log State menu
Syslog server settings index (1-4).
Type in the IP address of the Syslog
server receiving the message.
Select the level of message sent,
select: Warning, Information or All.
Type the UDP port number used for
sending
Syslog
messages.
default is 514.
Choose
Enabled
or
activate or deactivate this
290
The
Disabled
to