DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Figure 6 - 33. SNMP Host Table – Add New
Parameter
Description
IP Address
SNMP Version
Community String
or SNMP V3 User
Name
Type the IP address of the remote
management station that will serve
as the SNMP host for the switch.
From the pull-down menu select:
V1 – To specifies that SNMP version
1 will be used.
V2 – To specify that SNMP version 2
will be used.
V3 – To specify that the SNMP
version 3 will be used.
Type in the community string or
SNMP V3 user name as appropriate.
192