DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Click on the port you want to configure on the Port
Configurations menu and then click the Edit button. This will
open the following dialog box:
Figure 6 - 19. Port Configurations − Edit
The Unit drop-down dialog box allows you to select different
switches in a switch stack, if you have the optional stacking
module installed and the switches in the stack are properly
interconnected.
The Port drop-down dialog box allows different ports (on the
currently selected Unit) to be selected for configuration.
Use the State<Enabled> pull-down menu to either enable or
disable the selected port.
Use the Flow Control<Off> pull-down menu to either turn flow
control on or off for the selected port.
172