D-Link DES-3326SR User Manual page 206

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Parameter Description
User Name
Group Name
SNMP Version
If Encryption (V3 only) is
checked configure also:
Auth-Protocol
Type in the new SNMP V3 user name
or community string for V1 or V2.
This can be any alphanumeric name
of up to 32 characters that will
identify the new SNMP user.
Type in the new SNMP V3 group
name. Again, this can
alphanumeric name of up to 32
characters that will
SNMP group the new SNMP user will
be associated with.
From the pull-down menu select:
V1 – To specifies that SNMP version
1 will be used.
V2 – To specify that SNMP version 2
will be used.
V3 – To specify that the SNMP
version 3 will be used.
In the Space provided, type an
alphanumeric sting of between 8 and
20 characters that will be used to
authorize the agent
packets for the host.
From the pull-down menu select:
MD5 − To specify that the HMAC-
MD5-96 authentication level will
194
be any
identify the
to receive