DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Advanced Setup
Changing switch operation mode setting changes some of the
menus and configuration options for the Advanced Setup of the
switch. The configuration data for each mode is however, saved
when the switch's operating mode is changed.
Configuring VLANs
Note: the switch allows the assignment of an IP interface to
each VLAN, in IP Routing mode. The VLANs must be configured
prior to setting up the IP interfaces.
To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions and
to configure the port settings for IEEE 802.1Q VLAN support.
Go
to
the
Advanced
Setup
folder,
select
VLAN
Configurations, and click the 802.1Q VLANs link to open the
following dialog box:
Figure 6 - 36. 802.1Q VLANs
196