D-Link DES-3326SR User Manual page 179

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The Version field displays the version number of the stacking
firmware.
The switch's current order in the switch stack is also displayed
on the Stacking Module's front panel − under the STACK NO.
heading:
Figure 6 - 15. The Stacking Module's Front Panel
Notice the Link and Act LEDs. These LEDs have the same
function as the corresponding LEDs for the switch's Ethernet
ports. The Link LED lights to confirm a valid link, while the
ACT LED blinks to indicate activity on the link.
The Stack No. seven-segment LED displays the Unit number
assigned to the switch. A 0 (a zero) in the display indicates
that the stacking module is in the process of determining the
stack status and has not yet resolved the switch's Unit
number.
The stacking order can be automatically configured using the
switch's MAC address − the lower the numerical value of a
given switch's MAC address, the lower the number in the
stacking order the switch will be assigned. The switch with the
lowest MAC address, will then become the Master Switch.
Alternatively, the stacking order can be manually assigned
using the console's Command Line Interface (CLI).
You can use the show stacking command to display the
current switch stack information. The syntax of the show
stacking command is as follows:
167