D-Link DES-3326SR User Manual page 104

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Multicast Routing Algorithms
An algorithm is not a program. An algorithm is a statement of
how a problem can be solved. A program is written to implement
an algorithm.
Multicast packets are delivered by constructing multicast trees
where the multicast router is the trunk, the branches are the
various subnetworks that may be present, and the leaves are
end recipients of the multicast packets.
have been developed to construct these trees and to prune
branches that have no active mulitcast group members
Flooding
The simplest algorithm for the delivery of multicast packets is
for the multicast router to forward a multicast packet to all
interfaces. This is referred to as flooding. An equally simple
refinement of flooding is to have the router check to determine
if a given multicast packet has been received before (in a
certain amount of time). If it has, then the packet does not
need to be forwarded at all and can be dropped. If the packet
is being received for the first time, it should be flooded to all
interface, except the interface on which it was received. This
will ensure that all routers on the network will receive at least
one copy of the multicast packet.
There are some obvious disadvantages to this simple algorithm.
Flooding duplicates a lot of packets and uses a lot of network
bandwidth. A multicast router must also keep a record of the
multicast packets it has received (for a period of time) to
determine if a given packet has been previously received. So
flooding uses a lot of router memory.
Multicast Spanning Trees
A multicast delivery tree that spans the entire network with a
single active link between routers (or subnetwork) is called a
multicast spanning tree. Links (or branches) are chosen such
that there is only one active path between any two routers.
When a router receives a multicast packet, it forwards the
Several algorithms
92