D-Link DES-3326SR User Manual page 237

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The following fields can be set or are displayed:
Parameter Description
Transit Area ID
Neighbor Router
Status
Area Aggregation Configuration
Area Aggregation allows all of the routing information that may
be contained within an area to be aggregated into a summary
LSDB advertisement of just the network address and subnet
mask. This allows for a reduction in the volume of LSDB
advertisement traffic as well as a reduction in the memory
overhead in the switch used to maintain routing tables.
Allows the entry of an OSPF Area ID
− previously defined on the switch −
that allows a remote
communicate with the
(area 0). A Transit Area cannot be a
Stub Area or a Backbone Area.
The OSPF router ID for the remote
router. This is a 32-bit number in
the form of an
(xxx.xxx.xxx.xxx) that
identifies the remote area's Area
Border Router.
Displays the current status (UP or
DOWN) of the corresponding OSPF
Virtual Interface.
225
area to
backbone
IP address
uniquely