D-Link DES-3326SR User Manual page 228

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
The following parameters can be set or are displayed:
Parameter Description
OSPF Route ID
Current Route ID
State
OSPF Area Setting
This menu allows the configuration of OSPF Area IDs and to
designate these areas as either Normal or Stub. Normal OSPF
areas allow Link-State Database (LSDB) advertisements of
routes to networks that are external to the area, Stub areas do
not allow the LSDB advertisement of external routes.
A 32-bit number (in the same format
as an IP address − xxx.xxx.xxx.xxx)
that uniquely identifies the switch in
the OSPF domain. It is common to
assign the highest
assigned to the switch (router).
this case, it
10.255.255.255, but any unique 32-
bit number will do.
entered, the highest
assigned to the switch will become
the OSPF Route ID.
Displays the OSPF
currently in use by the switch. This
Route ID is displayed
convenience to the
changing the switch's OSPF Route
ID.
Allows OSPF to be
disabled globally on
without changing
configuration.
216
IP address
In
would be
If 0.0.0.0 is
IP address
Route ID
as a
user when
enabled or
the switch
the OSPF
Stub