10.7.3 Extension Baud Rate Setting
1. PC accesses the AH500 series CPU module via RS232 after connecting the device according
to the following figure.
DeviceNet Builder
2. Open DeviceNet Builder; then select "Setup" >> "Communication Setting" and then the following
dialog box appears, where select the already built driver.
Note: The driver is built through COMMGR. Please refer to section 8.1.3 in DeviceNet Builder
help file.
3. Select "Network" >> "Online" as below.
Ch a pt er 1 0 De v ic eN e t Com m unic at i on Mo d ul e A H 10 DN ET
P 05
S
RS232
PS05
CPU530-EN
AH10DNET-5A
C U530-EN
P
10DNET
1 0 - 2 9