Port - Delta AH500 Manual

AH5 00 M od ul e M anua l
Number Name
block
10 Label
11 Set screw
12 Connector
13 Projection

AH15SCM-5A
15SCM
1
RUN
ERROR
2
3
C O M 1
4
CO M 2
Number Name
1 Model name
RUN LED indicator (green)
ERROR LED indicator (red)
2
TX1/TX2 LED indicator
(orange)
RX1/RX2 LED indicator
(orange)
3 COM1 (RS-232)
4 COM2 (RS-232)
5 Set screw
6 Label
7 Projection
8 Set screw
9 Connector
10 Projection
8 - 6
Description
Nameplate
Fixing the module
Connecting the module and a backplane
Fixing the module
Description
Model name of the module
Operating status of the module
ON: The module is running.
OFF: The module stops running.
Error status of the module
ON: There is a hardware error.
OFF: The module is normal.
Blink: 1. The setting of the module is incorrect, or there
is a communication error.
2. Restoring the module to the default factory
value
Blink: The data is being transmitted through the
RS-232 port.
OFF: The data is not being transmitted through the
RS-232 port.
Blink: The data is being reveived through the RS-232

port.

OFF: The data is not being reveived through the
RS-232 port.
RS-232 mode
RS-232 mode
Fixing the module
Nameplate
Fixing the module
Fixing the module
Connecting the module and a backplane
Fixing the module
8
5
9
6
10
7