DataCard CR500 Installation And Administrator's Manual page 99

Menu Display Settings
Retransfer Temp Level
Speed (Front)
Speed (F-UV)
Speed (Back)
Speed (B-UV)
MG Peel Mode


Standby:


Backside Cool:


Bend Remedy Temp Level
Speed
Heat Roller Power Saving:


HR Control:


CR500 Instant Issuance System Installation and Administrator's Guide
Standard
MG Stripe
Front Wait
Back Wait
On
Off
Off
Up to 60 minutes
Off
On
Function
Displays the value set using Printer Manager. Refer
to "Print" on page 62 for more information on
specifying Retransfer settings.
Displays the value set using Printer Manager. You
must have WebService-level access to set this value.
Refer to "Start Printer Manager"
Not supported.
Displays the value set using Printer Manager. You
must have WebService-level access to set this value.
Refer to "Start Printer Manager"
Not supported.
Displays the value set using Printer Manager. Refer
to "Print" on page 62.
Not supported.
Displays the value set using Printer Manager. Refer
to "Print" on page 62.
Displays the value set using Printer Manager. Refer
to "Print" on page 62 for more information on
specifying Bend Remedy settings.
Displays the value set using Printer Manager. You
must have WebService-level access to set this value.
Refer to "Start Printer Manager"
Displays the value set using Printer Manager. Refer
to "Behavior" on page 59
specifying the power saver mode.
Displays the value set using Printer Manager.
on page 48.
on page 48.
on page 48.
for information on
A-5