DataCard CR500 Installation And Administrator's Manual page 51

13.
Subnet Mask displays on line 2. Press E
process in
14.
When you finish entering the subnet mask, Network displays on line 1 and Gateway Address
displays on line 2. Press E
step 12.
15.
Press E
NTER
16.
Press the U
Continue with
CR500 Instant Issuance System Installation and Administrator's Guide
step 12.
(m) and enter the gateway address, following the process in
NTER
(n) to apply the static IP address, the subnet mask, and the gateway address.
button twice to exit the menu system.
SER
Set Up Network Access.
(l) and enter the subnet mask, following the
NTER
37