DataCard CR500 Installation And Administrator's Manual page 101

Menu Display Settings
Option MG:
IC Antenna:
IC Contact:
Contact IC R/W:
Bend Remedy HR:
Turn Over:
MG ISO Type:
JIS Type:
Retry Count:
CR500 Instant Issuance System Installation and Administrator's Guide
None
ISO
None
Installed
None
ISO Type
None
Installed
None
Installed
None
Installed
Loco
Hico
Loco
Hico
0, 1, 2, 3
Function
Displays the type of magnetic encoder installed.
Displays whether the contactless card option is
installed:
None: A contactless card option is not installed.

Installed: A contactless smart card option is

used.
Displays whether the contact card option is
installed:
None: A contact card option is not installed.

ISO type: The type of contact card option

installed.
Displays whether the contact card R/W option is
installed:
None: The R/W option is not installed.

Installed: An Internal Contacts for External

Reader option is installed.
Displays whether the bend remedy option is
installed.
Displays whether the turnover (duplex) option is
installed.
Displays the coercivity value set using Printer
Manager for writing data to magnetic stripe cards (if
the magnetic stripe option is installed):
Loco: 238 x 102 [A/m] (300[Oe])

Hico: 218 x 103 [A/m] (2750[Oe])

Refer to "MagStripeGeneral"
information.
Displays the value set using Printer Manager. Refer
to "MagStripeGeneral"
on setting the retry value.
on page 68 for more
on page 68 for information
A-7