Table of Contents
Advertisement
Web configuration
To make sure that you can access the Internet successfully, please check the following first.
Make sure the connection through Ethernet between the Advanced Cable Gateway
and your computer is OK.
For wireless networking (see page 26), you will need a WiFi-certified wireless client
adapter for each computer you want to connect wirelessly. If your computer does not
dispose of the WiFi function, you should equip it with one of the following WiFi
accessories (norm 802.11b/g) : WiFi USB key, PCMCIA WiFi cards, PCI WiFi cards.
Make sure the TCP/IP protocol is set properly.
Accessing the Web Configuration
The Advanced Cable Gateway offers local management capability through a built in HTTP
server and a number of diagnostic and configuration web pages. You can configure the
settings on the webpage and apply them to the device.
Once your host PC is properly configured; please proceed as follows:
1.
Start your web browser and type http://cable.config/.
2.
After connecting to the device, you will be asked to enter username and password.
By default, the username is " " and the password is "admin".
If you log in successfully, the main page will appear.
User Manual ACG905 – draft
Web configuration
31
Advertisement
Table of Contents
