Using Your Phone With Multiple Handsets; Registering/Re-Registering An Extra Handset; Selecting A Base - THOMSON ACG905 -- C Manual

Advanced cable gateway

Hide thumbs Also See for ACG905 -- C:

Table of Contents

6. Using your phone with multiple handsets

a. Registering/Re-registering an extra handset

You can have up to 5 handsets registered to your ACG TH58 base. If you already have 5

handsets registered and you want to change one of them, you must uninstall it before

installing the replacement handset.

On the base:

Switch the base to registration mode.

On the handset:

Select "Menu" by pressing the left soft key.

Select "Registration" and confirm by pressing the "SELECT" key.

Select "Register Handset" and confirm by pressing "Ok".

Select the base to be associated with this handset (1 to 4) and confirm by pressing

"Ok".

Enter the system PIN (0000 by default) and confirm by pressing "Ok"..

Wait a few seconds until you hear a single beep.

Your handset is now registered.

b. Selecting a base

Each handset may be registered to 4 different ACG bases.

If you register your TH58 with a non-ACG base, you will not be able to

access the data functions.

To change base:

Select "Menu" by pressing the left soft key.

Select "Registration" and confirm by pressing "Ok".

Select "Select Base" and confirm by pressing "Ok".

Select the number of the base using the up and down key (1 to 4) and confirm by

pressing "Ok".

The bases to which the handset is registered are identified by the [ ] symbol.

User Manual ACG905 – draft

Handset user guide

Table of Contents