Important Connection Information; Ethernet Connection To One Or Two Computers - THOMSON ACG905 -- C Manual

2. Important Connection Information

The Advanced Cable Gateway supports Ethernet connections.
Below are important points to remember before you connect the Advanced Cable Gateway.
For Ethernet connections, go to page 20.
For telephone and fax connections, go to page 23.

Ethernet Connection to one or two Computers

Make the connections to the modem in the following sequence:
1. Connect one end of the coaxial cable to the cable connection on the wall, and the
other end to the CABLE connector on the Advanced Cable Gateway.
2. Connect one end of the power cord into the 120V, 60Hz, 0.5A socket on the
Advanced Cable Gateway, and the other end into the mains plug.
3. Connect one end of the Ethernet cable (straight-wired, see below) to the Ethernet
port on the back of your computer, and the other end to the ETHERNET port on the
Advanced Cable Gateway.
User Manual ACG905 – draft
Set-up
20