Table of Contents
Advertisement
Web configuration
MAC Restrict Mode: Click Disabled to welcome all of the clients on the network (default
setting); select Allow to permit only the clients on the list to access the cable modem; or
choose Deny to prevent the clients on the list to access this device.
MAC Address: Your Gateway identifies wireless PCs by their WiFi MAC Address. This address
consists of a string of 6 pairs of numbers 0-9 and letters A-F, such as 00 90 4B F0 FF 50. It is
usually printed on the WiFi card of the device (e.g. the PCMCIA card in a laptop). It can also
be determined from a Windows DOS prompt as explained below.
Enter the MAC addresses of the connected clients into the fields, and then click Apply to add
them to the list for access control.
Apply: After proper configuration, click Apply to invoke the settings.
Connected Clients:
The information of currently connected clients will be displayed here.
53
User Manual ACG905 – draft
Advertisement
Table of Contents
