Table of Contents
Advertisement
Make sure that the Ethernet cable is straight-wired (not "null" or crossover-wired). However,
you will need a crossover-type cable if you are connecting the gateway to a hub, or a hub
within a port switch that provides the same function.
Connecting More Than Two Computers to the Advanced Cable
Gateway
If you need to connect more than two computers or if you need to connect two computers,
but Wi-Fi is not accessible, you'll need the following additional equipment:
Crossover-wired, or "null," category 5 Ethernet cable for the Gateway to be connected
to the hub
10BaseT or 100BaseT Hub or Switch
Straight through, or standard, category 5 Ethernet cable (one for each computer to
be connected)
000
User Manual ACG905 – draft
Set-up
21
Advertisement
Table of Contents
