Table of Contents
Advertisement
Option: Wi-Fi Connection
The Advanced Cable Gateway is ready to support Wi-Fi. To enjoy wireless connection to your
PC or other equipments that can be linked to the gateway, your ACG905 requires a PC Card
(PCMCIA or PCI norm 802.11 b/g). Only the recommended cards can be used.
To set up the Wi-Fi connection, please follow the steps below:
1.
Ensure the power cord is unplugged.
2.
Remove the rubber protection on the right-upper-hand side of the gateway.
3.
Insert the PC card in the slot as far as it will go without forcing it.
4.
Plug the power cord into an AC-receptacle.
5.
The Wi-Fi PCMCIA card is disabled by default; it MUST be activated and configured
on the regular Wireless Settings webpage.
a. Connect your PC to the ACG by Ethernet.
b. type
http://cable.config/wlanBasic.html
the Wi-Fi settings to access the following page.
User Manual ACG905 – draft
in your internet browser to access
Set-up
26
Advertisement
Table of Contents
