Table of Contents
Advertisement
Chapter 2: WEB Configuration
Chapter 2: WEB Configuration
To make sure that you can access the Internet successfully, please check the following first.
1.
Make sure the Ethernet connection between the Wireless Gateway and your computer is OK.
2.
Make sure the TCP/IP protocol is set properly.
3.
Subscribe to a Cable Company.
Accessing the Web Configuration
The Wireless Gateway offers local management capability through a built in HTTP server and a number
of diagnostic and configuration web pages. You can configure the settings on the web page and apply
them to the device.
Once your host PC is properly configured; please proceed as follows:
1.
Start your web browser and type the private IP address of the Wireless Gateway on the URL
field: 192.168.0.1.
2.
After connecting to the device, you will be prompted to enter username and password. By
default, the username is ― ‖ and the password is ―admin‖.
If you login successfully, the main page will appear.
Illustrations contained in this document are for representation only.
Fig. 4
14
Advertisement
Table of Contents
