Web-Based User Interface - THOMSON SpeedTouch 510v6 Installation And Setup Manual

3 Web-Based User Interface

Embedded pages
Access
Tasks
Using the Web pages
E-DOC-CTC-20051017-0010 v1.0
The SpeedTouch™ comes with embedded web pages, providing an interface to the
software installed on the device. It allows easy setup and management of the
SpeedTouch™ via your Web browser from any PC connected to the SpeedTouch™.
Proceed as follows to access the pages:
1
Open your Web browser.
The recommended screen resolution is 1024 by 768 pixels.
2
In the address bar, type http://speedtouch.lan or your SpeedTouch™'s IP
address (192.168.1.254
3
Enter your SpeedTouch™ security user name and password.
The default user name is Administrator and the default password is
blank.
4
The SpeedTouch™'s home page will be displayed in your browser. From here -
depending on the rights of your user account - you have access to the other
pages.
Among others, you can:
View the SpeedTouch™'s current settings and status.
Configure the SpeedTouch™ to connect to your Service Provider with the
settings provided.
Set the SpeedTouch™'s firewall to work with specific applications.
Set up security features.
Enable remote management access.
Back up your configuration settings.
Reset the SpeedTouch™'s default settings.
Update the SpeedTouch™'s software.
When making changes to the SpeedTouch™ configuration via the Web pages, the
configuration is stored automatically whenever you click Apply.
For more information on the embedded pages, refer to the Help in the upper right
corner of the notification and navigation area or refer to the SpeedTouch™ User's
Guide.
by default) and press ENTER.
Chapter 3
Web-Based User Interface
23