Web-Based User Interface - THOMSON Speedtouch 580 Installation And Setup Manual

3 Web-Based User Interface

Embedded pages
Access
Tasks
Using the web pages
E-DOC-CTC-20050429-0061 v2.0
The SpeedTouch™ comes with embedded web pages, providing an interface to the
software installed on the device. It allows easy setup and management of the
SpeedTouch™ via your web browser from any PC connected to the SpeedTouch™.
To access the pages:
1
Open your web browser.
The recommended screen resolution is 1024 by 768 pixels.
2
In the address bar type http://speedtouch.lan or your SpeedTouch™'s IP
address, by default that is 192.168.1.254, and press Enter.
3
Enter your SpeedTouch™ security user name and password.
The default user name is Administrator and the default password is
blank.
4
The SpeedTouch™'s home page will be displayed in your browser window.
From here - depending on the rights of your user account - you have access to
the other pages.
Amongst others you can:
View the SpeedTouch™'s current settings and status.
Configure the SpeedTouch™ to connect to your Service Provider with the
settings provided.
Set the SpeedTouch™'s firewall to work with specific applications.
Set up security features.
Enable remote management access.
Back up your configuration settings.
Reset the SpeedTouch™'s default settings.
Update the SpeedTouch™'s software.
When making changes to the SpeedTouch™ configuration via the web pages, the
configuration is stored automatically whenever you click the Apply button.
For more information on the embedded pages, go to the Help link in the upper right
side of the notification and navigation area or refer to the SpeedTouch™ User's
Guide.
Chapter 3
Web-Based User Interface
29