Table of Contents
Advertisement
Web configuration
2. 802.11b/g Security
This page allows you to configure the Network Authentication. Here provides several different
modes of wireless security. You will have to enter proper information according to the mode
you select.
WEP Encryption:
If you choose Security NONE, the Network Key will not be shown on this page. If selected,
the data is encrypted using the key before being transmitted. For example, if you set WEP in
this field, then the receiving station must be set to use the 128 Bit Encryption, and have the
same Key value too.
Otherwise, it will not be able to decrypt the data.
If you select WEP (128-bit), you have to enter an encryption key:
Encryption Key 128 bits
The key used for WEP and WPA modes is a 128 bit hexadecimal ([0-9] [A-F]) key.
The key is composed of 26 hexadecimal characters.
51
User Manual ACG905 – draft
Advertisement
Table of Contents
