Draytek Vigor2133 User Manual page 91

Available settings are explained as follows:
Item
General Setup
DHCP Server Option
Force router to use "DNS
server IP address" .....
Inter-LAN Routing
Vigor2133 Series User's Guide
Description
Allow to configure settings for each subnet respectively.
Index - Display all of the LAN items.
Status- Basically, LAN1 status is enabled in default.
LAN2 –LAN4 and IP Routed Subnet can be observed by
checking the box of Status.
DHCP- LAN1 is configured with DHCP in default. If required,
please check the DHCP box for each LAN.
IP Address - Display the IP address for each LAN item. Such
information is set in default and you can not modify it.
Details Page - Click it to access into the setting page. Each
LAN will have different LAN configuration page. Each LAN
must be configured in different subnet.
IPv6 – Click it to access into the settings page of IPv6.
DHCP packets can be processed by adding option number and
data information when such function is enabled.
For detailed information, refer to later section.
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4 instead of DNS servers given by the
Internet Access server (PPPoE, PPTP, L2TP or DHCP server).
Check the box to link two or more different subnets (LAN and
LAN).
Inter-LAN Routing allows different LAN subnets to be
interconnected or isolated.
79