Draytek Vigor2133 User Manual page 670

wl config isolate [ssid_num lan member]
S y n t a x
S y n t a x
Parameter
mode[value]
mode show
channel [number]
preamble [enable]
txburst [enable]
ssid[ssid_num enable
ssid_name [hidden_ssid]]
Security [SSID_NUMBER]
[mode][key][index]
ratectl [ssid_num enable
upload download]
658
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to select connection mode for wireless connection.
Available settings are: "11bgn", "11gn", "11n", "11bg", "11g", or "11b".
It means to display what the current wireless mode is.
It means the channel of frequency of the wireless LAN.
The available settings are 0,1,2,3,4,5,6,7,8,9,10,11,12 and 13.
number=0, means Auto
number=1, means Channel 1
....
number=13, means Channel 13.
It means to define the length of the sync field in an 802.11 packet.
Most modern wireless network uses short preamble with 56 bit sync
field instead of long preamble with 128 bit sync field. However,
some original 11b wireless network devices only support long
preamble.
0: disable to use long preamble.
1: enable to use long preamble.
It means to enhance the performance in data transmission about
40%* more (by enabling Tx Burst). It is active only when both sides
of Access Point and Station (in wireless client) invoke this function
at the same time.
0: disable the function.
1: enable the funciton.
It means to set the name of the SSID, hide the SSID if required.
ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
ssid_name: Give a name for the specified SSID.
hidden_ssid: Type 0 to hide the SSID or 1 to display the SSID
It means to configure security settings for the wirelesss connection.
SSID_NUMBER: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or
SSID4.
mode: Available settings are:
disable:
wpa1x:
wpa21x:
wpamix1x:
wep1x:
wpapsk:
wpa2psk:
wpamixpsk:
wep:
key, index: Moreover, you have to add keys for wpapsk, wpa2psk,
wpamixpsk and wep, and specify index number of schedule profiles
to be followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26 Hexadecimal
digit format; WPA keys must be in 8~63 ASCII text string or 64
Hexadecimal digit format.
It means to set the rate control for the specified SSID.
ssid_num: Choose 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
enable: It means to enable the function of the rate control for the
No security.
WPA/802.1x Only
WPA2/802.1x Only
Mixed (WPA+WPA2/802.1x only)
WEP/802.1x Only
WPA/PSK
WPA2/PSK
Mixed (WPA+WPA2)/PSK
WEP
Vigor2133 Series User's Guide