Draytek Vigor2133 User Manual page 474

Refresh
Index
IP Address
TX rate (kbps)
RX rate (kbps)
Sessions
Action
APP QoS
Current /Peak/Speed
462
Click this link to refresh this page manually.
Display the number of the data flow.
Display the IP address of the monitored device.
Display the transmission speed of the monitored device.
Display the receiving speed of the monitored device.
Display the session number that you specified in Limit
Session web page.
Block - can prevent specified PC accessing into Internet
within 5 minutes.
Unblock –The device with the IP address will be blocked for
five minutes. The remaining time will be shown on the
session column. Click it to cancel the IP address blocking.
Use the drop down list to change the priority in data
transmission for the specified IP address (host).
Current means current transmission rate and receiving rate
for WAN interface.
Peak means the highest peak value detected by the router in
data transmission.
Speed means line speed specified in WAN>>General Setup.
If you do not specify any rate at that page, here will display
Auto for instead.
Vigor2133 Series User's Guide