Draytek Vigor2133 User Manual page 191

MAC Address Filter
Client's MAC Address
Apply SSID
Attribute
Add
Delete
Edit
Cancel
OK
Clear All
Backup Access Control
Upload From File
After finishing all the settings here, please click OK to save the configuration.
I I I - 1 - 5 W
I I I - 1 - 5 W
Below shows Wireless LAN>>WPS web page:
Available settings are explained as follows:
Item
Enable WPS
WPS Status
Vigor2133 Series User's Guide
check SSID 1 and SSID 2.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
After entering the client's MAC address, check the box of the
SSIDs desired to insert this MAC address into their access
control list.
s: Isolate the station from LAN - select to isolate the
wireless connection of the wireless client of the MAC address
from LAN.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
Click it to save the access control list.
Clean all entries in the MAC address list.
Settings on this web page can be saved as a file which can be
restored in the future by this device or other device.
Restore wireless access control settings and applied onto this
device.
P S
P S
Description
Check this box to enable WPS setting.
Display related system information for WPS. If the wireless
security (encryption) function of the router is properly
179