Draytek Vigor2133 User Manual page 543

-p <prefix>
-l n
-T n
TSPC/AICCU
-u <username>
-P <password>
-s <server>
AICCU
-p <prefix>
-l n
-o
-f
Static
-w <addr>
Others
-d <server>
-D <server>
-t <dhcp/ra/none>
-V
-k
-j
-r n
-c n
-q
-z
-x
-i
-b
-R
E x a m p l
E x a m p
> ip6 internet -W 2 -M 2 -u 88886666 -p draytek123456 –s amsterdam.freenet6.net
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> system reboot
Vigor2133 Series User's Guide
It means to set 6in4 LAN Routed Prefix.
It means to set 6in4 LAN Routed Prefix length.
It means to set 6in4 Tunnel TTL.
It means to set Username (max. 63 characters).
It means to set Password (max. 63 characters).
It means to set Tunnel Server IP.
<server>= IPv4 Addr or URL (max. 63 characters)
It means to set Subnet Prefix (AICCU).
It means to set Subnet Prefix length (AICCU).
It means to set AICCU always on. On = 1, Off = 0.
It means to set AICCU tunnel ID.
It means to set Default Gateway.
It means to set 1st DNS Server IP.
<server>= IPv6 Addr
It means to set 2nd DNS Server IP.
<server>= IPv6 Addr
It means to set ipv6 PPP WAN test mode for DHCP or RA.
It means to view IPv6 Internet Access Profile.
It means to dial the Tunnel on the WAN.
It means to drop the Tunnel on the WAN.
It means to set Prefix State Machine RA timeout.
It means to set Prefix State Machine DHCPv6 Client timeout.
It means to set WAN detection mode (0:NS Detect, 1:Ping Detect,
2:Always On).
It means to set Ping Detect TTL (0-255).
It means to set Ping Detect Host (hostname or IPv6 address).
It means to set ipv6 connection interval (1500-60000 (unit:10ms)).
It means to enable DNSv6 based on DHCPv6. On = 1, Off = 0
It means to Enable RIPng. On = 1, Off = 0
e
l e
531