Draytek Vigor2133 User Manual page 222

Password
Pre-Shared Key
Confirm Pre-Shared
Key
Digital Signature
(X.509)
Peer IP/VPN Client IP
Peer ID
3. After finishing the configuration, please click Next. The confirmation page will be
shown as follows. If there is no problem, you can click one of the radio buttons listed on
the page and click Finish to execute the next action.
Available settings are explained as follows:
Item
Go to the VPN
Connection
Management
Do another VPN
Server Wizard Setup
210
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPsec policy above.
The length of the name is limited to 11 characters.
For IPsec/L2TP IPsec authentication, you have to type a
pre-shared key.
The length of the name is limited to 64 characters.
Type the pre-shared key again for confirmation.
Check the box of Digital Signature to invoke this function.
Peer ID – Choose the peer ID selection from the drop down
list.
Local ID – Choose Alternative Subject Name First or Subject
Name First.
Type the WAN IP address or VPN client IP address for the
remote client.
Type the ID name for the remote client.
The length of the name is limited to 47 characters.
Description
Click this radio button to access VPN and Remote
Access>>Connection Management for viewing VPN
Connection status.
Click this radio button to set another profile of VPN Server
through VPN Server Wizard.
Vigor2133 Series User's Guide